milirace.blogg.se - Linux fancontrol

#Linux fancontrol drivers#
#Linux fancontrol driver#
#Linux fancontrol windows#

Required for I211 NICs running on macOS versions up to Big Sur, based off of the SmallTree kext but patched to support I211 (doesn't work on macOS 12 Monterey or above).Required for most AMD boards running Intel NICs.Might have instability issues on some NICs, recommended to stay on Big Sur and use SmallTree.Required for I211 NICs running on macOS Monterey and above.Requires OS X 10.9 or newer, 10.6-10.8 users can use IntelSnowMausi instead for older OSes.Required for the majority of Intel NICs, chipsets that are based off of I211 will need the SmallTreeIntel82576 kext.

Here we're going to assume you know what ethernet card your system has, reminder that product spec pages will most likely list the type of network card.

Similar to the above, however supports 32 and 64-Bit kernels so perfect for OS X 10.4-5 booting and 32-Bit CPUs.

AMD 15h/16h may have issues with AppleALC and Ryzen/Threadripper systems rarely have mic supportįor those who plan to boot 10.7 and older may want to opt for these kexts instead:.

AppleALCU.kext is a pared down version of AppleALC that only supports digital audio - but you can still use AppleALC.kext on digital audio-only systems.

Used for AppleHDA patching, allowing support for the majority of on-board sound controllers.

Note the SSDT-PNLF.dsl file included is only required for laptops and AIOs, see Getting started with ACPI (opens new window) for more info.

Used for graphics patching, DRM fixes, board ID checks, framebuffer fixes, etc all GPUs benefit from this kext.

WhateverGreen (opens new window)( Required).

Do not use if you do not have a supported Dell machine, mainly Dell laptops can benefit from this kext.

Allows for finer monitoring and control of the fans on Dell machines supporting System Management Mode (SMM).

Used for measuring battery readouts on laptops.

Do not use if you don't have an ambient light sensor (ie.

Used for the ambient light sensor on laptops.

Requires RadeonSensor from the same repository.

Used for monitoring GPU temperature on AMD GPU systems.

Requires AMDRyzenCPUPowerManagement (see AMD CPU Specific Kexts).

Under active development, potentially unstable.

Used for monitoring CPU temperature on AMD Zen-based systems.

Used for monitoring Intel CPU temperature.

While VirtualSMC supports 10.4, plugins may require newer versions. Kexts here are compiled each time there's a new commit. Most kexts listed below can be found pre-compiled in the build repo (opens new window).

Location Note: These files must be placed under EFI/OC/Kexts/.

kext extension visible(and do not add one manually if it's missing).

#Linux fancontrol windows#

Windows and Linux note: Kexts will look like normal folders in your OS, double check that the folder you are installing has a.

#Linux fancontrol driver#

efi driversĪ kext is a kernel extension, you can think of this as a driver for macOS, these files will go into the Kexts folder in your EFI. Alternative to HfsPlusLegacy but for 32-bit CPUs, don't mix this with other HFS.

#Linux fancontrol drivers#

These files will go in your Drivers folder in your EFI 32-Bit specificsįor those with 32-Bit CPUs, you'll want to grab these drivers as well Not required for OS X 10.10, Yosemite and newer.without UEFI) will have this driver built-in, not requiring it This file is bundled with OpenCorePkg under EFI/OC/Drivers.Required to boot recovery on OS X 10.7 through 10.9.Don't mix this with HfsPlus.efi, choose one or the other depending on your hardware.This is generally seen on Sandy Bridge and older(as well as low end Ivy Bridge(i3 and Celerons)) Legacy variant of HfsPlus, used for systems that lack RDRAND instruction support.Used for OpenCore picker on legacy systems running DuetPkg, not recommended and even harmful on UEFI(Ivy Bridge and newer) (opens new window).Pay close attention to each entry as you may not need all 4: In addition to the above, if your hardware doesn't support UEFI(2011 and older era) then you'll need the following. Reminder this was bundled in OpenCorePkg we downloaded earlier.Replacement for AptioMemoryFix.efi (opens new window), used as an extension for OpenCore to help with patching boot.efi for NVRAM fixes and better memory management.OpenRuntime.efi (opens new window)( Required).For Sandy Bridge and older(as well as low end Ivy Bridge(i3 and Celerons), see the legacy section below.macOS Installers and Recovery partitions/images). HfsPlus.efi (opens new window)( Required).Getting started with ACPI (opens new window)įor the majority of systems, you'll only need 2.